Dux Britaniarum Game 2: Raiding a Wagon Train

After his initial setback some of the goblins deserted, but Badzur managed to convince a band of Dunlending to join him, and in the month of April he once again launched a raid into Enedwaith.

His scouts brought him the news of a small convoy of supplies coming from the north, and he planned an ambush at a river crossing...

Ruk springs the surprise on the allies!

Belegon orders his men to form a shieldwall while Thorgaut guards his flank. While Ruk demonstrates against the shieldwall, Badzur leads a furious charge against the levy guarding the mule train, routing them from the field.

The Allies are bested in the first clash of battlelines, and Belegon orders the men to retreat towards the crossing, where they are joined by levies sallying forth from the border fort. The orcs capture the mule train!

Separated from the men of Gondor, the dwarves fend off the orc assault and eventually rejoin their allies.

As it turned out the random terrain movement and scenario generation favoured the orcs this game: we rolled a river with a single crossing and the orcs enter the tabletop right where the convoy was.

In my first attack I played all five cards in my hand: Carpe Diem, Strong Arm, Bounding Move, Aggressive Charge, and Fear, which routed the levy guarding the mules and making possible their subsequent capture.

The first clash between the two battlelines went in my favour, and the Allies withdrew to reform. After that we spent two turns staring at each other while I moved the mules off the table.

The raid saw moderate losses on both sides: the orcs lost 11 men and the allies 16. More Dunlending joined Badzur, and in the month of May he once again launched a raid into Enedwaith, but was unopposed as Belegon chose to rebuild his strength over confronting them in his weakened state.

As this was our second game, things played faster. We hope to get the third game of the campaign in soon.

Swordsmen

I find myself losing impetus as I try to paint another 40 or so figures to complete my Warhammer (The) Empire army. Times like these it helps to have "unique" figures to paint.

The first one comes from Mirliton's Halberdier Command Group.

I really like the character of this figure. The original figure cradled its helm in its left arm, but the helm, while magnificent, was out of period for my army. I hacked the whole left arm off, and glued a matching left arm from the Perry plastic set holding a poignard in its place. This figure will join my swordsmen unit; the unit is armed with sword and shield, and the poignard in the off hand has a similar function, giving the figure a "parry save".

The second figure (the one on the right) comes from Mirliton's Swordsmen Command Group.

Again, I hacked off the arm below the elbow to swap the shield for a more period one, and embedded arrows in the shield and the ground to add even more dynamism to the figure. I like how the figure echoes the unit standard bearer which I painted before I even bought the Mirliton figures.

And here are the first two ranks of the swordsmen unit:

The flocking and shields have yet to be added. I've given the figures red pants to set them apart from the other foot units - swordsmen have a higher WS in Warhammer and are I suppose "semi-elite", and I am using red pants as a mark for "professional" troops as opposed to militia in this army.

These are the last figures I will be painting for the next couple of weeks. I'm off to Madrid next week and plan to drop by Atlantica. Hope I don't overbuy...

Greatswords

With the Picts done, I turn my attention to my WOTR/Warhammer (The) Empire army. The first to get painted are these seven fully-armoured men-at-arms with two-handed weapons from Mirliton.

As you can see, they look just about historical enough to blend in with the rest of my figures. They will be fielded as Greatswords, the elite foot units of (The) Empire. I like the look of a fully-plate-armoured figure, so this is one unit I will add to if I find suitable figures - perhaps Perry may decide to release a plastic men-at-arms set at Salute this year...

Olde Towne

With fg investing in one of the upcoming VSF Kickstarters, we decided to get down to he business of recreating the Victorian urbanscape on table.

After some discussion, we remembered that we have the Streets and Sewers of Malifuax sets, which provided a base for the tabletop. For the buildings themselves we are tending towards card buildings, not just due to costs reasons but also storage space. After experimenting with some of the fantasy buildings I have, I've streamlined by process to gluing just the four walls onto a mounting board, cutting them out, and then taping them together with masking tape, leaving the last joint free so the whole piece can be stored flat - assembly will be made with the aid of an L-clip from the Malifaux set.

Then yesterday, while browsing at the local art supplies store, I found a new material: 1mm PVC foam board. It has a non porous surface, cuts more easily than cardboard, and looks like it may be more durable. An A3 sized sheet costs only S$1.75 and is just enough for a building.

Today, acting on a tip-off from a TMP discussion thread, I bought the Olde Towne set from Stoelzel's Structures. It looked expensive at US$12, but the pdf is 461 pages long and the way the graphics are organised fit my mode of operation (even if it can be a bit hard to scroll through all those pages to find the page you want).

I printed out the required pages, glued them to the foam board, cut them out (some slips there - I'll be more careful in the future), disguised the edges with a brown marker, and made this:

Each of the graphics come in three shades: daylight, night-time, and monochrome night-time - a blue overcast look to simulate movie darkness. The one shown above is the night-time version, which is darker in real life but looked bright when I as viewing it off my monitor...

Sadly, I didn't have any of my VSF figures handy to pose next to it.

The ground is a tile from the streets of Malifaux set.

The building doesn't look much on its own, but I believe once we have the numbers we can have a rather nice stage for our VSF games.

Skirmish Tray

We had a bit of a family crisis this past week but it seems everything is getting back to normal again.

On the plus side, it meant I stayed at home if I wasn't working and I got quite a bit of painting done - kept me from bouncing off the walls.

Anyway, this is one of the things I managed to finish:

When I started the WOTR project, I intended to use the figures for my Strandhogg games. When the guys started going into Warhammer Fantasy, I had to make a choice between styling my army as a Bretonnian army, or an (The) Empire army. Eventually I decided to go with the handguns and cannons, and so went for a (The) Empire army.

The down side to this, however, was that I lost the longbow effect - (The) Empire archers are strictly skirmishers, which meant no deep ranks of archers.

Under the 8th edition, skirmishers have to be deployed in a rank-and-file formation and the end of their movement, but rather annoyingly, the figures have to be 1/2" apart. This created a market for "skirmish trays", which are specialised movement trays with slots for square bases at 1/2" apart.

I got mine from Back 2 Base-ix. These come in two pieces of 3mm MDF (the top one with the slots in them, and the bottom as a base) and all the little slots that were cut out, which you can use as bases.

I didn't want my figures to look like they are standing on a platform, so I replaced the bottom with a paper-thin sheet of plastic - the top piece provides enough strength to the whole construct. To make the formation look less sparse, I added a couple of stakes and bundles of arrows from the Bretonnian archers set. It was when I was going to glue the stakes into position when I realised I don't actually know where to put them, or to put it in another way, where the archers stood in relation to the stakes. Behind? In front until they are charged? Beside? In the end practicalities prevailed and I placed the stakes so that they don't jut out off the base.

I also found out that the bases I based my archers on were a little bigger than the slots - I ended up filing the slots AND the bases to make them fit.

I'm quite happy with the outcome.

Two versions

One of the things that got me started on refurbishing and expanding my Space Marines force was the Duke Gerard figure from Reaper.

I use him as a Space Marine Captain, armed (after much deliberation) with a Relic Blade and Storm Shield. The sheathed sword is hidden behind the shield, so I removed the hand holding the bolter I originally equipped him with and gave him an empty hand instead.

A while later, I thought it would be good if I could field a figure with the Captain Sicarius stats, so I decided to buy another figure. However, I wanted it to represent the same person, the idea being that it was the same captain of the company, but equipped differently. Fortunately, the new figure I got had similar hair to the Duke Gerard figure, and to further the mimicry I ripped the wings off the original figure and magnetised it so it can be used on either figure.

So here they are.

Painted Picts

Here are the Picts I promised.

They are from Tanatus Miniatures, a small range of figures which I did not know of until fg showed me the site.

I absolutely love these figures. I especially like the way the sculptor modelled the hair - it is like a Dark Age chart for grading of male pattern baldness - even if the leader does look like one of the Bee Gees, and the standard bearer Ron Jeremy (I was tempted to change the motif on the banner from a boar to a hedgehog...).

They are a perfect match for my Perry plastics, and thus also GW's LOTR range. In fact, I think they have more realistic proportions than Perrys. I replaced the soft metal spears that came with the packs with steel spears left over from my 15mm Attalid Pergamenes.

I painted them using my standard block-and-wash method, which makes them very dull - they look depressing if not for the addition of green flock. They can be used in three capacities: as Dunlending allies for my orcs in our Dux Britanniarum campaign, as peasants in my Strandhogg games, or in the front ranks with my armed peasants in Warhammer, where they will count as Spearmen. The "movement tray" they are on is actually a lipped chariot base, which I bought as artillery bases for my WOTR guns and crew.

I painted them all with black hair because they were described as swarthy and dark-haired by Tolkien - the professor was obliviously and unapologetically racist the way some old British gentlemen are, I suppose. Tolkien didn't tell us a lot about the Dunlending, but it is believed that they are based on the Celts (as the Rohirrim are based on Germanic invaders). While googling, I read that a computer game assigns them clans named after animals, and decided to give them a banner featuring a Celtic-styled boar.

Lacking the skills to make a "proper" banner, I simply found a "parchment" pattern I liked, printed that on a piece of paper, then found a boar motif, resized it to fit, and then printed that on the same piece of paper. This gave me a "pre-painted" banner which I simply cut and glued to the spear. I then painted the exposed edge of the paper with some Devlan Mud, which "sealed" the edge and added some staining.

I really like the way this unit turned out - let's hope I don't fail them in the next DB game...

Squad 7

Here they are: the seventh complete squad in my Space Marines force. While they are the fourth tactical squad in my force, they are designated as the seventh squad as, rather annoyingly, there seems to be no decals for the numerals 5 and 6.

They are not done from scratch, but bought off ebay - someone painted them in the base colour and did the weapons in silver, but probably decided he didn't want them anymore afterwards. I had to shave some mould lines off, but instead of having to assemble them from parts and priming them myself, I merely had to had prime some parts in black. Given the unpredictable performance of my spray primer these days, this is much more how I prefer to work.

A fourth tactical squad gives me more options for configuring my force. With the exception of another Space Marine captain figure (to give my captain an alternative weapons load-out) and perhaps a few scouts figures to round up the squad (hopefully the Raging Heroes kickstarter provides the necessary figures), this is probably as far as will go with this force.

Over the next few days I hope to paint up a small unit of Picts - very nice figures, those - for our Dux Britanniarum campaign.