Museum Miniatures 'ZSculpt' Normans and Anglo-Saxons

 I have a collection of 15mm Dark Age figures, mostly bought painted off ebay, which we used for a '1066' campaign based on an S&T magazine almost 20 years ago.

Since then these figures have seen little to no use, but the recent release of Midgard Heroic Battles has prompted me to try to put them on the table again. The figures are based on DBX convention, and while I could have used some of the bases as Heroes, I decided to paint up some dedicated bases for easier play.

After some browsing I decided on Museum Miniatures' ZSculpt figures, because I had a good experience with Cromarty's 3D sculpted resin figures. Museum Miniatures do not ship to where I live, but my old friend Steve in UK graciously agreed to make the order for me and ship them over. When the figures arrived, however, I found that they were metal castings, and that a few of them were bad casts.

With the few packs I purchased I was able to make a level 3 Hero base for each of the three contenders of 1066: William, Harold, and Harald, each with their iconic flag; four more generic level 2 Hero bases, and four generic Champion bases, which would give each side two of each, enough for a standard game.

Peninsular War scenario and Midgard Heroic Battles

For our session in February we once more played two games.

The first game was another scenario from Michael Hopper, this time the battle of Monesterio. The game featured Nabil's newly-painted Spanish army, and the participation of two players from the wargames group we made contact with last year. The scenario required the French players to move their siege artillery train across the table, while the Spanish had to prevent that from happening.

The rules were once more our grid-based rules adapted from To the Last Gaiter Button, and once again the grid-based nature of the rules caused some confusion at first for the new players, but once they got the concept things moved quickly.

The Spanish forces advance towards the French. The artillery train can be seen in the corner.

The Spanish forces were handled boldly: the two infantry divisions advanced down two axes, while the cavalry went down the flank to cut off the French route of advance.

Nabil's Spanish see their first action!

The French sent their lone unit of cavalry on the Spanish right to threaten their flank, and for a while effectively held up a whole division of infantry. But they were too conservative with their infantry deployment, and failed to create a perimeter around their siege artillery train, which became exposed and were captured by the Spanish.

For our second game we played the Battle of Azanulbizar using Midgard Heroic Battles. I had planned on using my LOTR figures with the rules, and which better battle to recreate with them than the battle that saw single combat between dwarf and orc leaders?

We played the Last Stand scenario, with Azog and his goblins deployed before an East Gate of Moria terrain piece. I commanded the goblin left flank, and decided to push my forces out to prevent the dwarves from getting too close.

The goblin left flank

Nabil, playing Azog and commanding the right flank, allowed the dwarves to get into melee too quickly, where their superiority in armour soon told. Azog threw his bodyguard into the fray, and then promptly fled down the hill through a gap in the dwarven line; however, it was too late - the goblins lost the last of their Reputation token, and lost the game.

Dwarves surround the last unit of goblins.

Despite this being my second game, I think I managed to get most of the rules right, forgetting only the Brittle rule for the goblins. The game was quick and fun, and at the scale we played fit the niche of a second game very well.

For our session in March I am planning to run a game of Here's the Ruckus!, once more using LOTR figures. I know I had earlier dismissed the rules, but when I was looking for a set of medieval skirmish rules that had climbing, jumping, and falling rules, I took a second look at them and managed to "get" them, and so decided to give them a spin. Stay tuned for more!

Terrain and Movement Trays from Supreme Littleness Designs

I apologise for going "recipe blog" mode in this post, but...

Like many wargamers, I too have been swept up in the Midgard Madness and bought a copy of the rules. I plan to use them with my GW LOTR figures, which I have several of, but not enough if I used the typical 8 or 10 figures per unit for infantry, and so I settled for units of 6 (3 for foot skirmishers).

As my figures are singly-based, I needed movement trays. Most wargamers seem to favour Warbases for this - they even have a range of movement trays just for Midgard - but I needed movement trays with 6 slots. In addition, FG already has several movement trays with 6 slots (which he got back in the day when we played Dux Britanniarum), and these had frontages of just shy of 9cm, instead of the typical 12cm.

A bit of googling brought up the Supreme Littleness Designs site, which happily offered movement trays with 6 slots. What's more, they offered them in straight as well as wavy edges - I have been wanting to try irregular-edged movement trays to see how they blend with my mats - and instead of using MDF for the base, they used thin cards, which I prefer.

And since we were paying for postage, FG and I ordered some kits from their Frozen City Ruins range.

The two MDF buildings you see in the top photo are from them. I made a few cuts on the edges of the walls so that not all angles were right angles, then painted the pieces with a slurry made of wall plaster, grey craft paint, and PVA glue. I based them to match my existing "Osgili-esque" buildings, using a textured sheet with York stone pattern for the base instead of the MDF one provided, did a coat of black and then brown wash over them, and garnished the bases with fallen leaves and stones instead of snow.

As for the movement trays, I assembled and then primed them with a brown spray primer (more to seal the cardboard base), then painted them with a basecoat of green mixed to match my mat, and then stippled some brown paint to match the pattern of the mat. Finally, I finished them with some tufts and Geek Gaming Scenics scatter. They are shown below with a measurement template made by FG.

We have actually played a test game of Midgard, and hope to run a game with the rest of the group soon.

A Trio of Terrain Projects

We begin this year with photos of a few terrain projects I have been working on.

The first of these is an "Afghan fort" style building in 15mm which I must have acquired more than two decades ago. I cannot remember who made it, but I doubt it is still in production. It sat in the same box as my adobe buildings all this time, until my renewed interest in the Indian Mutiny made me dig it out again. I decided that it needed to sit on an elevation, and made a low hillock out of cork coasters, including steps which wound its way up. I then textured the hillock, and painted it to match the arid mat which I would use the piece with.

Hopefully it will see some action soon.

The second of these are some cardstock buildings from Paper Terrain, which I bought and built last year when I was planning an Epic scale ACW project. The cardstock isn't really thick, but when based on a stiff base, they look durable enough.

A couple of the buildings were a little trickier to assemble, but they do add interest to the tabletop.

The final one of these is the East Gate of Moria terrain piece. The inspiration for this was Midgard heroic Battles, which I couldn't resist buying. I already own many dwarves and Moria goblins, so naturally my thought turned to the war between these two races as described by Tolkien in the appendix to The Lord of the Rings. The final battle of Azanulbizar took place outside the East Gate of Moria, where Azog slew Nain in single combat, and was in turn slain by Dain Ironfoot. The account of the battle seemed to be exactly the kind of battle Midgard is written for.

I decided to make terrain piece depicting the East Gate of Moria, consisting of an elevation, a gate, and maybe a mountainside. It turned out FG already has a resin dwarven gate/arch, so I was spared the effort of making one. I made the base using corrugated boards, then textured, painted, and added vegetation to it to match the mat we would use it for. Finally, I printed a picture of a dwarven-style gate I found on google and blu-tac'ed it to the arch.

FG and I tried the rules earlier this week, and we plan to run it for the gang later this month, so stay tuned for the battle report.