Monday, June 06, 2016

Heroic Maps Pharoah's Tomb and Finger and Toe Models Catacombs


I blame Netflix, I do...

After getting the rules, painting up the figures, and doing some terrain boards, our VSF/EOTD project stalled as we moved on to other genres. Now, after watching Penny Dreadful (excellent series - great acting, and the sets are just begging to be reproduced on the tabletop), I felt the need to do some work for the period.

As my faction is Egyptian-themed, from the outset I have wanted an Egyptian-themed headquarters for them, so this became the choice for my project. I imagined a Victorian mansion that looked Victorian from the outside, but had Egyptian decor on the inside.

Due to a lack of storage space, I knew I wanted something that can be taken down and packed more or less flat, but I also wanted it to be interesting from a game-play point of view.

I went to my usual source for 2D terrain: Heroic Maps. After looking at a few of their Egyptian offerings, I ended up getting their free Pharoah's Tomb - Upper pack (there is a - Lower pack which depicts the underground part of this pack.

The pack shows a pillared courtyard that rises in a few levels to lead to an interior.

The architecture of the area represented made me decide to try something I have always wanted to try: a 2.5D terrain. This would involve gluing multiple layers of materials on top of each other, and I knew that the material I would use is 1mm PVC foam sheets, which are now my favourite craft material. Instead of representing the pillars in full-height, I would use something that is about man-height instead.

For the interior, I decided to go for full-height walls. For the texture of the walls, I went for Finger and Toe Model's Catacombs pack. This pack provided walls and pillars "skins" for Egyptian, Greek, and Roman interiors.

After some calculations, I decided to get the foam sheets in 1mm for the courtyard, in 3mm for the walls, and in 5mm for the interior. I had planned on getting wooden thread spools for the pillars, but the art shop did not have them, so I settled for corks instead. To colour the sides of the foam sheets, I also bought a coloured marker.

After four straight hours, I managed to complete the project, shown here with the walls tacked together by removable tape.



Here is a more lateral view of the set-up, showing the elevations of the terraces.


The whole set-up is broken down into three parts: the courtyard with a platform in the middle, a terrace of steps, and the interior space. Broken down, the largest piece has the footprint of just under 28cm x 22cm.

I am quite happy with the result, except that the corks aren't tall enough to block a figure entirely; I might glue two corks narrow-end to narrow-end instead, or just buy some wooden spools from ebay.

(Added: Check out this large battle-board made with Heroic Maps' geomorphic tiles.)

4 comments:

Diplomatist said...

Very nice! I particularly like the use of corks.

Da Gobbo said...

The cork plan sounds like it could work, nice terrain piece dude.

captain arjun said...

Thanks, gents.

Laffe said...

That looks very spiffing. Clever stuff!